
Armored Optical Cable 8 Core
GYXTW fiber optic cable, optical fibers are housed in a loose tube that is made of high-modulus plastic(PBT) and filled with jelly. The tube is armored with a layer of corrugated steel tape,two parallel steel wires are placed at two sides of steel tape.Then a PE sheath is extruded.
Description
Technical Parameters
our company
Features
- Tube filled with special grease to protect the optical fiber critically.
- Steel tape armored has good pressure resistance and preventing rodent bites.
- Two parallel steel wires ensure the tensile strength.
- Small diameter, light weight, easy to lay.
Environmental Characteristics
• Transport/storage temperature: -40℃ to +60℃
Delivery Length
• Standard reel length: 2km/drum or 3km/drum; other lengths are also available.
Sample
- If we have inventory and the quantity is small, it is free.
- If we do not have inventory, the samples and shipping costs must be paid by your company.
- However, when we receive your initial order, we will refund the sample cost to you.
own brand
Pack and ship
Tips
1. What is a 5G Network?
5G technology refers to the fifth generation of cellular networks, designed to improve internet and telephone connectivity. It offers ultra-fast internet and provides customers with an unprecedented multimedia experience.
Using 5G technology, you will experience extremely low latency, enhanced connectivity, higher security, and better network compatibility.
2. Introduction to Optical Fiber
Optical fiber, also known as optical fiber, is a technology that transmits information over plastic or glass fibers.
An optical fiber cable may consist of hundreds of cups or core fibers. These fibers are surrounded by another layer of glass called the cladding.
The cladding provides further protection through buffer tubes, and additional jacket layers protect individual chains.
Both the cladding and the fiber core have different refractive indices. When light passes through these areas, it bends at certain angles.
This light bending occurs in a sawtooth pattern, known as total internal reflection. The optical signal travels slowly by 30% due to the dense layers of glass or plastic fibers.Repeaters are used at long intervals to increase the signal strength in optical fiber transmission. These repeaters regenerate the optical signal through a series of conversions and transmissions.
It is known that optical fiber cables can support 10 Gigabit. These fiber optic cables are classified as single-mode and multimode based on the type of fiber used.
Single-mode fiber: These cables have a small-diameter glass fiber core, which helps prevent the possibility of attenuation. This allows signals to travel long distances.
Multimode fiber: These cables have a large glass fiber core, and the optical signal bounces multiple times as it passes through them. This bouncing introduces attenuation, which is a reduction in signal strength. This attenuation also means a high probability of signal loss, interference, etc.
Hot Tags: Armored Optical Cable 8 Core, China Armored Optical Cable 8 Core manufacturers, suppliers, factory
Technical Characteristics
| Fiber Count | 2~24 |
| Loose Diameters | 2.0~2.5mm |
| Loose Material | PBT (Polybutylene Terephthalate) |
| Strength Member Material | Steel wire |
| Strength Member size | 2x1.0mm steel wire |
| Armor | Corrugated steel tape |
| Outer Jacket Material | PE |
| Nominal Outer Dimensions | 8.0mm (±0.3) |
|
Tension Strength (Long-Term /Short-Term) |
600N/1500N |
|
Crush Resistance (Long-Term /Short-Term) |
300 N/100mm 1000 N/100mm |
| Minimum Bend Radius (Static / Dynamic) | 10 x OD / 20 x OD |
*All above the cable size can be customized.
Previous
No InformationSend Inquiry


















