Fiber Optical Patch Cord
Drop cables are cables that run from the distribution point or cable to the subscriber/user.
Fiber patch cord, often called fiber patch cable, fiber jumper, or fiber patch lead, is a length of fiber cable that terminated with fiber optic connectors at each end. The connectors allow fiber optic patch cord to be rapidly connected to an optical switch or other telecommunications/computer device.
Description
Technical Parameters
our company
Environmental Characteristics
- Transport/storage temperature: -20℃ to +60℃
Delivery Length
- Standard reel length:5m,10m,20m,35m, 45m,50m,75m,100m,150m,200m,300m;
- Other lengths are also available.
Our services
1. 24-hour one-on-one online service to ensure efficient support.
2. Thoughtful customer reception from hotel reservation to factory visit.
3. Extremely cautious throughout the process from order confirmation to product shipment.
own brand
Pack and ship
Tips
Complete Introduction to SC/UPC Patch Cords
**Basic Definition** SC/UPC patch cords are fiber optic patch cords using SC square pluggable connectors and UPC ultra-physical contact polishing technology on the end faces. They are the mainstream connection medium in digital optical communication scenarios.
**Core Structure and Appearance**
**Connector:** 2.5mm ceramic ferrule, blue square shell, push-pull snap-lock, no rotation required.
**End Face Technology:** Micro-spherical flat polishing, no tilt angle, high-precision polishing achieves a tight fit between the fiber end faces.
**Key Performance Parameters**
**Insertion Loss:** Typical value <0.3dB, high-quality products can be as low as ≤0.2dB.
**Return Loss:** Industry standard ≥50dB, far exceeding the -35dB standard of basic PC technology.
**Main Application Scenarios**
Conventional digital signal transmission in data centers, office LANs, and telecommunications equipment rooms.
High-speed optical networks and switches with speeds of 400G and below, and interfacing with SFP/GBIC optical modules.
Typical link patching scenarios on the ODF side of the fiber optic distribution frame.
Damage Avoidance Methods for Mixed Connections with APC Endfaces
**Basic Identification and Differentiation**
**Appearance Marking:** SC/UPC connectors are blue, while APC connectors are uniformly green. Color coding allows for quick differentiation between the two endface types.
**Endface Characteristics:** APC endfaces are ground at an 8° angle, the tilt is visually observable, while UPC endfaces are completely flat micro-spherical surfaces.
**Construction Operation Standards**
**Pre-Installation Classification:** Store UPC and APC patch cords in separate racks and areas to avoid mixing them on the same distribution frame and causing incorrect connections.
**Pre-Matching Verification:** Before each insertion or removal, confirm that the endface types of the connectors at both ends are completely consistent. Directly connecting different types using ordinary flanges is prohibited.
**Emergency Fault Handling:** If a sudden drop in signal occurs after a mismatched connection, immediately remove the connector and use a fiber optic cleaning pen to wipe both endfaces, checking for scratches or chips.
Patch cords with physically damaged end faces are to be discarded and must not be used in the system to avoid causing signal failures throughout the entire link.
Compliant Connection Solution: When it is absolutely necessary to achieve interoperability between UPC and APC links, a dedicated PC-APC conversion patch cord must be used. Direct connection via ordinary flanges is prohibited.
Hot Tags: fiber optical patch cord, China fiber optical patch cord manufacturers, suppliers, factory, Drop Fibre Cable, Fiber Optic Cable Ftth, Flat Drop Fiber Cable, ftth drop cable and patch cords, Outdoor Drop Cable, Outdoor Ftth Drop Cable
Technical Characteristics
| Cable Part | |
| Fiber Count | 1~4 |
| Fiber type | G657A1 or A2 |
| Strength Member Material | FRP or Steel wire |
| Dielectric Strength Member size | 2 x 0.5mm /2x0.4mm |
| Messenger Material | Steel wire |
| Messenger size | 1.0mm / 7*0.33mm |
| Nominal Outer Dimensions(±0.3) | 2.0 mm x 5.0 mm |
| Outer Jacket Material | LSZH |
| Tension Strength (Short-Term / Long-Term) | 300N/600N |
| Crush Resistance (Short-Term / Long-Term) |
1000 N/100mm 2200 N/100mm |
| Minimum Bend Radius (Static / Dynamic) | 20 x OD / 40 x OD |
| Connectors part | |
| Connector type | SC/UPC,SC/APC |
| Insertion Loss | ≤ 0.25dB |
| Return Loss (For Single mode) | UPC ≥ 50dB , APC ≥ 60dB |
| Repeatability | ±0.1dB |
*All above the cable size can be customized.
Previous
Fiber Optic ConnectorsNext
Cable DropSend Inquiry



















